• Home
  • Blog
  • How to Create Exploded Views and Assembly Instructions in Autodesk Inventor

How to Create Exploded Views and Assembly Instructions in Autodesk Inventor

How to Create Exploded Views and Assembly Instructions in Autodesk Inventor

A well-made assembly drawing should do more than show what a product looks like. It should help someone understand how the parts fit together and, when needed, how to assemble them in the right order.

An exploded view is a useful way to show those relationships. Components are moved away from their assembled positions so readers can see individual parts, fasteners, and their placement. In Autodesk Inventor, you can create an exploded view in a presentation file, then use it in a drawing with balloons and a parts list.

This guide walks through the process and shares a few ways to make the finished instructions easier to follow.

Start with a clean assembly

The quality of an exploded view depends partly on the assembly underneath it. Before creating a presentation, open the assembly and check that the model is in good shape.

Make sure the parts are correctly constrained and positioned. Check that fasteners are present, repeated components have been placed consistently, and there aren’t any unwanted gaps or overlaps. If components have generic names such as Part1 or Component12, consider giving them useful names. Clear names make it easier to find parts later and help keep the parts list understandable.

It also helps to think about how someone would assemble the product. Which component forms the base? Which parts should be installed first? Are there fasteners that need to be added before another component blocks access to them? You don’t need to solve every instruction detail before opening the presentation, but having a rough sequence in mind will make the view more purposeful.

Create a presentation file

In Inventor, an exploded view is created in a Presentation file. The presentation references the assembly and lets you move components for illustration without changing their original assembled positions.

Create a new presentation and select the assembly you want to explain. Once it opens, take a moment to choose a useful camera angle. A view from slightly above and to one side often shows depth and makes the arrangement easier to read. If an important feature is hidden, rotate the view until readers can see it.

The goal is to show the assembly clearly—not to find the most dramatic angle. A simple, familiar viewpoint is often better than a heavily tilted view that makes the parts hard to recognize.

Move components into an exploded position

Use Tweak Components to move selected parts away from their assembled locations. Select a component or group, choose a direction, and specify how far it should move.

A good exploded view uses enough space to reveal how the parts relate to one another. Move components along sensible paths, such as the direction they would be installed or removed. For example, a cover might move upward, a shaft might move along its axis, and a side plate might move outward from the main body.

Try not to spread every component by the same amount. Large parts may need more space, while small parts can remain close to their original positions. The important thing is that the reader can tell where each component belongs.

For assemblies with repeated components, such as bolts or washers, decide whether to move them as a group or show them individually. Moving a set together can keep the view tidy. Showing them separately may be better when the drawing needs to make the quantity or installation order obvious.

Keep the assembly relationships visible

An exploded view can become confusing if parts are moved too far apart. Readers should be able to connect each component with its correct location in the assembled product.

A useful check is to look at the view and ask: “Could someone tell where this part goes without asking me?” If the answer is no, adjust the position, add a trail, or include a closer view.

Add trails to show where parts go

Trails indicate the path a component takes between its assembled and exploded positions. They’re especially helpful for small or similar-looking parts, such as screws, pins, and spacers.

Use trails where they add information. A trail can make a component’s destination clear, but a drawing with too many intersecting trails can be harder to read than one without them. If several parts move in different directions, arrange their paths so they remain visually distinct.

Review the trails from the same viewpoint as the final drawing. A path that looks clear while editing may overlap another component or callout once the view is placed on a sheet.

Show the assembly sequence

An exploded view is most useful when it explains the order of assembly, not just the final locations of separated parts.

Consider arranging components so the sequence is easy to follow. You might show a base or frame first, then the main functional components, followed by covers and fasteners. Where the sequence isn’t obvious from the picture alone, add numbered steps or short notes.

For a large assembly, one view may not be enough. You can divide the instructions into stages—for example, subassembly preparation, main assembly, and final fastening. Breaking the process into a few clear views is usually easier to follow than squeezing every component into a single crowded image.

Create the drawing view

Once the presentation looks clear, create a drawing and place the exploded view on a sheet. Choose a scale that makes the components and callouts readable. If the assembly is too large or detailed for one view, consider adding another view or using separate sheets for different stages.

Give the drawing a useful title and include any information needed to interpret it, such as the product name, drawing number, revision, or units. Keep the sheet layout balanced so the assembly view, parts list, and notes have room to breathe.

Add balloons and a parts list

Balloons connect components in the view to rows in the parts list. Place them so each one points clearly to the intended component. Keep balloon leaders short where possible and avoid crossing them over one another or through important geometry.

A parts list should agree with the balloons and the assembly. Check the item numbers, descriptions, and quantities carefully. If the same component appears in several places, confirm that the listed quantity reflects the total used in the assembly.

If the drawing contains many components, organize the balloons around the view instead of placing them wherever there happens to be open space. Consistent placement helps readers scan the drawing and match each callout to the parts list.

Add notes where the picture needs help

Some instructions are easier to explain with a short note than with additional geometry or arrows. Notes can identify a special fastener, explain an orientation, or call out a step that isn’t obvious from the exploded view.

Keep notes specific. “Install bracket” may leave questions unanswered; “Install bracket with the slotted face outward” gives the reader a useful detail. If a note refers to a component, make sure the component is clearly identified in the view or parts list.

Review the instructions from a reader’s point of view

Before sharing the drawing, review the complete sheet as if you had never seen the assembly before.

Check that:

  • Every balloon points to the correct component.
  • The parts list has the right descriptions and quantities.
  • Important parts are visible and not hidden behind larger components.
  • Trails and leaders don’t overlap in confusing ways.
  • The assembly order is clear.
  • Notes explain details that the view alone cannot communicate.
  • Text and linework remain readable at the intended print or screen size.

If possible, ask someone unfamiliar with the design to follow the instructions. Their questions can reveal missing steps, ambiguous component names, or a view angle that hides an important connection.

Common mistakes to avoid

  • Exploding parts too far apart: Large gaps make it harder to understand how the parts fit together. Use enough separation to reveal the components, then stop.
  • Using one view for a complicated assembly: A crowded drawing may technically show every part but still be difficult to use. Divide complex instructions into stages or additional views.
  • Relying on balloons alone: Balloons identify parts, but they don’t explain assembly order or special orientation. Add sequence numbers or notes when needed.
  • Ignoring repeated hardware: Small fasteners are easy to overlook, even though they’re often essential to the assembly process. Check their placement and quantities carefully.
  • Skipping a final parts-list check: A wrong quantity or unclear description can cause confusion even when the exploded view is excellent. Review the table against the assembly before publishing.

Final thoughts

Autodesk Inventor’s presentation and drawing tools can turn a complex assembly into a set of instructions people can understand. Start with a well-organized assembly, move components with a clear purpose, and use trails, balloons, notes, and parts lists to explain the details.

The best exploded view isn’t necessarily the one with the parts spread furthest apart. It’s the one that helps a reader see where each component belongs and what to do next.


Master Autodesk Inventor: From Basics to Advanced | Complete 3D Design Masterclass

Master Autodesk Inventor through real-world mechanical design projects, build professional 3D CAD models, and develop industry-ready product design skills.

What you will learn:

Professional 3D Parts Assemblies Animations Presentation Files Technical Drawings